On 06/05/2015 02:59 AM, Priyanka Jain wrote: > T1040D4RDB is a Freescale reference board that hosts the T1040 SoC. > T1040D4RDB is re-designed T1040RDB board with following changes : > - Support of DDR4 memory > - Support of 0x66 serdes protocol which can support following interfaces > - 2 RGMII's on DTSEC4, DTSEC5 > - 1 SGMII on DTSEC3 > - Support of QE-TDM > > Similarily T1042D4RDB is a Freescale reference board that hosts the T1040 > SoC. T1042D4RDB is re-designed T1042RDB board with following changes : > - Support of DDR4 memory > - Support for 0x86 serdes protocol which can support following interfaces > - 2 RGMII's on DTSEC4, DTSEC5 > - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3 > - Support of DIU > > Signed-off-by: Priyanka Jain <[email protected]> > Signed-off-by: Codrin Ciubotariu <[email protected]> > Signed-off-by: Wang Dongsheng <[email protected]> > --- > changes from v2: > - adds SGMII suport using CPLD > - removes extra endif > changes from v3: > - removes checkpatch error > changes from v4: > - wrong use of defined MACRO in eth.c file, adds macro properly > changes from v5: > - updates README files, t1040d4_rcw.cfg and t1042d4_rcw.cfg > - update DDR settings > changes from v6: > - update DDR settings, config files, cpld code, README > - Add QGMII phy addr configs, update DIU_SEL value
Applied to u-boot-mpc85xx master after adding CONFIG_SPI_FLASH to defconfig, the same as your v8 patch. Thanks. York _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
