Hi,
On 01-08-15 21:22, Scott Wood wrote:
On Sat, 2015-08-01 at 14:30 +0200, Boris Brezillon wrote:
Hi Hans,
On Sat, 1 Aug 2015 14:15:53 +0200
Hans de Goede <hdego...@redhat.com> wrote:
Hi,
On 23-07-15 14:33, Piotr Zierhoffer wrote:
This is a basic driver for the sunxi NAND controller for Allwinner A20.
It supports only SPL.
The driver uses DMA for data transfers. It does not support writing.
Thanks for your work on this.
I've merged patches 1 - 3 in my sunxi-wip branch,
and I'll include them in the next u-boot-sunxi pull-req.
Shouldn't we at least wait for Scoot's approval?
Or Scott's. :-)
ACK
Thanks.
though I'd encourage quickly implementing multiple spl payload locations
to work around the breakage of the bad block marker mechanism, as was
discussed.
I agree 100%, I've added note to my sunxi todo list for this. Note I only
have this on my todo list as a reminder, since a few other people are actively
working on sunxi nand support I hope that someone else will tackle this.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
