Hi Clemens,
On 05.08.2015 09:28, Clemens Gruber wrote:
On 04.08.2015 19:28, Clemens Gruber wrote:
This allows baseboards without SPI to compile.
Signed-off-by: Clemens Gruber <clemens.gru...@pqgruber.com>
Cc: Markus Niebel <markus.nie...@tq-group.com>
Cc: Tom Rini <tr...@konsulko.com>
---
board/tqc/tqma6/tqma6.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
index 29db838..5c4d104 100644
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@@ -131,6 +131,8 @@ int board_mmc_init(bd_t *bis)
return 0;
}
+#if defined(CONFIG_MXC_SPI)
+
static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
/* SS1 */
NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
@@ -161,6 +163,8 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs)
(cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1;
}
+#endif /* defined(CONFIG_MXC_SPI) */
+
static struct i2c_pads_info tqma6_i2c3_pads = {
/* I2C3: on board LM75, M24C64, */
.scl = {
@@ -201,7 +205,9 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+#if defined(CONFIG_MXC_SPI)
tqma6_iomuxc_spi();
+#endif
tqma6_setup_i2c();
Hmmm. This should not be necessary. Please take a look at the wru4
baseboard addition that is already in mainline. Especially this
patch:
I noticed your patch but then we would still have to define
CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS in our board config or include
the tqma6.h config, which defines too many things we do not need.
I would have expected that all boards using these TQ SoM's include this
config header.
The problem is, we have different clocks and more c files, so we use a separate
board directory and a separate board config without SPI defines and just use
obj-y += ../../tqc/tqma6/tqma6.o in front of our object files in the Makefile.
If we don't exclude those SPI parts, we would either have to define those SPI
config options (which does not make sense) or move all of our board code in one
file under tqc/tqma6 which is not an option, we also define additional clocks
via a separate IMX_CONFIG file.
Wouldn't it be better to always exclude this code when not using SPI instead of
weakly defining the tqma6_iomuxc_spi function?
Then small baseboards could be put in tqc/tqma6 and larger projects could still
just link to tqma6.o and put all their stuff in a separate board directory.
How about this patch:
diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
index 29db838..345930f 100644
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@@ -28,6 +28,13 @@
#include "tqma6_bb.h"
+#ifndef CONFIG_SF_DEFAULT_BUS
+#define CONFIG_SF_DEFAULT_BUS 0
+#endif
+#ifndef CONFIG_SF_DEFAULT_CS
+#define CONFIG_SF_DEFAULT_CS 0
+#endif
Does this work for you?
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
