Hello Luaksz,
Am 21.07.2015 um 08:59 schrieb Lukasz Majewski:
Hi Heiko,
ported from linux:
b2ba27a5c56ff: usb: gadget: at91_udc: move prepare clk into process
context
IMHO, presented above description is not enough. I'd prefer to see one
patch which adds the code from linux - including the exact commit
message.
Ok, I change this.
Then, u-boot specific adjustments should be applied in a separate patch.
In that way you would:
1. Avoid #ifdef __UBOOT__
Hmm.. I change this, but I do not hate this define, if I debug in the
Code I immediately see, if it is linux code, or U-Boot specific ...
we had such a discussion also on other places ... maybe we need
here a decision, if we remove this define complete?
2. Make the process of updating code easier
I soon post a v2, just did a rebase and found some compile errors
for the smartweb board ...
bye,
Heiko
Signed-off-by: Heiko Schocher <h...@denx.de>
---
checkpatch detects a lot of errors, but as this code is copied
from linux, I tend to not fix them, so later updates with
linux code is easier.
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/at91_udc.c | 2203
+++++++++++++++++++++++++++++++++++++++++
drivers/usb/gadget/at91_udc.h | 171 ++++
include/linux/usb/at91_udc.h | 20 + 4 files changed, 2395
insertions(+) create mode 100644 drivers/usb/gadget/at91_udc.c
create mode 100644 drivers/usb/gadget/at91_udc.h
create mode 100644 include/linux/usb/at91_udc.h
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 70bb550..22323fa 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o
usbstring.o
# new USB gadget layer dependencies
ifdef CONFIG_USB_GADGET
+obj-$(CONFIG_USB_GADGET_AT91) += at91_udc.o
obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o
obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o
obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o
diff --git a/drivers/usb/gadget/at91_udc.c
b/drivers/usb/gadget/at91_udc.c new file mode 100644
index 0000000..f4ae13b
--- /dev/null
+++ b/drivers/usb/gadget/at91_udc.c
@@
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot