This introduces omap5 support for omap_die_id, which matches the common omap_die_id definition. It replaces board-specific code to grab the die id bits.
Signed-off-by: Paul Kocialkowski <[email protected]> --- arch/arm/cpu/armv7/omap5/hwinit.c | 8 ++++++++ arch/arm/cpu/armv7/omap5/prcm-regs.c | 4 ++++ board/ti/dra7xx/evm.c | 7 +++---- board/ti/omap5_uevm/evm.c | 12 +++--------- 4 files changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 3699050..d0ac029 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -376,6 +376,14 @@ void init_omap_revision(void) init_cpu_configuration(); } +void omap_die_id(unsigned int *die_id) +{ + die_id[0] = readl((*ctrl)->control_std_fuse_die_id_0); + die_id[1] = readl((*ctrl)->control_std_fuse_die_id_1); + die_id[2] = readl((*ctrl)->control_std_fuse_die_id_2); + die_id[3] = readl((*ctrl)->control_std_fuse_die_id_3); +} + void reset_cpu(ulong ignored) { u32 omap_rev = omap_revision(); diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index d01ce88..9c182b0 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -297,6 +297,10 @@ struct prcm_regs const omap5_es1_prcm = { struct omap_sys_ctrl_regs const omap5_ctrl = { .control_status = 0x4A002134, .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4, + .control_std_fuse_die_id_0 = 0x4A002200, + .control_std_fuse_die_id_1 = 0x4A002208, + .control_std_fuse_die_id_2 = 0x4A00220C, + .control_std_fuse_die_id_3 = 0x4A002210, .control_phy_power_usb = 0x4A002370, .control_phy_power_sata = 0x4A002374, .control_padconf_core_base = 0x4A002800, diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 94a1a8c..ed5ec07 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -57,16 +57,15 @@ int board_init(void) int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - u32 id[4]; + unsigned int die_id[4] = { 0 }; if (omap_revision() == DRA722_ES1_0) setenv("board_name", "dra72x"); else setenv("board_name", "dra7xx"); - id[0] = readl((*ctrl)->control_std_fuse_die_id_0); - id[1] = readl((*ctrl)->control_std_fuse_die_id_1); - usb_set_serial_num_from_die_id(id); + omap_die_id(die_id); + usb_set_serial_num_from_die_id(die_id); #endif return 0; } diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 833ffe9..1b922a8 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -112,20 +112,14 @@ static void enable_host_clocks(void) */ int misc_init_r(void) { - int reg; - u32 id[4]; + unsigned int die_id[4] = { 0 }; #ifdef CONFIG_PALMAS_POWER palmas_init_settings(); #endif - reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; - - id[0] = readl(reg); - id[1] = readl(reg + 0x8); - id[2] = readl(reg + 0xC); - id[3] = readl(reg + 0x10); - usb_fake_mac_from_die_id(id); + omap_die_id(die_id); + usb_fake_mac_from_die_id(die_id); return 0; } -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
