Hi Michal/Siva, On 1 September 2015 at 11:41, Jagan Teki <[email protected]> wrote: > These are the previous version patches- > https://patchwork.ozlabs.org/patch/302945/ > https://patchwork.ozlabs.org/patch/264440/ > > This series adds zynq qspi controller driver in driver model and > enabled support on relevent zynq boards and tested the same. > > Branch to verify: > $ git clone git://git.denx.de/u-boot-spi.git > $ cd u-boot-spi > $ git checkout -b master-next origin/master-next
Please let me know for any comments, and also test the same. > > Changes for v4: > - Rebase to master > > Changes for v3: > - Added driver-model to zynq-qspi driver > - devicetree support on zynq-qspi > - Enabled qspi nodes on relevent board dts files > - Enabled qspi driver on relevent board config files > > Changes for v3: > - Fixes with macro's addition > > Jagan Teki (16): > spi: Add zynq qspi controller driver > dts: zynq: Add zynq qspi controller nodes > doc: device-tree-bindings: spi: Add zynq qspi info > dts: microzed: Enable zynq qspi controller node > dts: zc702: Enable zynq qspi controller node > dts: zc706: Enable zynq qspi controller node > dts: zc770-xm010: Enable zynq qspi controller node > dts: zed: Enable zynq qspi controller node > configs: Enable legacy SPI flash interface support > zynq-common: Enable zynq qspi controller support > zynq-common: Enable Bank/Extended address register support > configs: zynq: Enable zynq qspi controller > spi: Kconfig: Add Zynq QSPI controller entry > spi: zynq_spi: Add config reg shift named macros > spi: zynq_spi: Rename baudrate divisor mask name > spi: zynq_spi: Store cs value into private data > > arch/arm/dts/zynq-7000.dtsi | 12 + > arch/arm/dts/zynq-microzed.dts | 5 + > arch/arm/dts/zynq-zc702.dts | 5 + > arch/arm/dts/zynq-zc706.dts | 5 + > arch/arm/dts/zynq-zc770-xm010.dts | 5 + > arch/arm/dts/zynq-zed.dts | 5 + > configs/zynq_microzed_defconfig | 2 + > configs/zynq_zc702_defconfig | 2 + > configs/zynq_zc706_defconfig | 2 + > configs/zynq_zc70x_defconfig | 2 + > configs/zynq_zc770_xm010_defconfig | 1 + > configs/zynq_zed_defconfig | 2 + > doc/device-tree-bindings/spi/spi-zynq-qspi.txt | 26 ++ > drivers/spi/Kconfig | 9 + > drivers/spi/Makefile | 1 + > drivers/spi/zynq_qspi.c | 622 > +++++++++++++++++++++++++ > drivers/spi/zynq_spi.c | 20 +- > include/configs/zynq-common.h | 10 + > 18 files changed, 729 insertions(+), 7 deletions(-) > create mode 100644 doc/device-tree-bindings/spi/spi-zynq-qspi.txt > create mode 100644 drivers/spi/zynq_qspi.c > > -- > 1.9.1 > thanks! -- Jagan | openedev. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
