Enabled zynq qspi controller node for zc770-xm010 board. => sf probe 0 -- bus1 for selecting qspi controller => sf probe 1 -- bus0 for selecting spi controller
Signed-off-by: Jagan Teki <[email protected]> Cc: Simon Glass <[email protected]> Cc: Siva Durga Prasad Paladugu <[email protected]> Cc: Michal Simek <[email protected]> --- Changes for v2. v3, v4: - none Changes for v5: - Make qspi as spi0 arch/arm/dts/zynq-zc770-xm010.dts | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index 680f24c..cf56ac8 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -16,7 +16,8 @@ ethernet0 = &gem0; i2c0 = &i2c0; serial0 = &uart1; - spi0 = &spi1; + spi0 = &qspi; + spi1 = &spi1; }; chosen { @@ -53,6 +54,10 @@ }; }; +&qspi { + status = "okay"; +}; + &can0 { status = "okay"; }; -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
