In get_phy_device_by_mask(), when no phy is found, currently we only print a message to show the first phy address that is not found. But this is not always the case as multiple phys can be specified by phy_mask. Change to print all phys that are not found, and to reduce the console boot log, change to use 'debug' instead of 'printf'.
Signed-off-by: Bin Meng <[email protected]> --- drivers/net/phy/phy.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 0d66e75..651e456 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -671,7 +671,14 @@ static struct phy_device *get_phy_device_by_mask(struct mii_dev *bus, if (phydev) return phydev; } - printf("Phy %d not found\n", ffs(phy_mask) - 1); + + debug("\n%s PHY: ", bus->name); + while (phy_mask) { + int addr = ffs(phy_mask) - 1; + debug("%d ", addr); + phy_mask &= ~(1 << addr); + } + debug("not found\n"); return NULL; } -- 1.8.2.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
