On Saturday, September 05, 2015 at 03:47:12 PM, Simon Glass wrote: > Hi, > > On 4 September 2015 at 00:31, Siva Durga Prasad Paladugu > > <[email protected]> wrote: > > Added USB XHCI driver support for zynqmp. > > > > Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> > > --- > > Changes for v4: > > - Added sanity check for index as per > > > > review comment > > > > Changes for v3: > > - Decreased the phy reset delay to 10 micro secs > > - Defined base addresses in board config file as > > > > per review comment. > > > > Changes for v2: > > - Moved all from xhci-zynqmp.h to .c file as > > > > per review comment > > > > - Removed ad-hoc function zynqmp_xhci_core_exit() > > > > as per review comment > > > > --- > > > > drivers/usb/host/Makefile | 1 + > > drivers/usb/host/xhci-zynqmp.c | 148 > > ++++++++++++++++++++++++++++++++++++ include/configs/xilinx_zynqmp_ep.h > > | 2 + > > 3 files changed, 151 insertions(+), 0 deletions(-) > > create mode 100644 drivers/usb/host/xhci-zynqmp.c > > Can you convert this to use driver model? See xhci-exynos5.c for an > example.
Right :) Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
