It is not very useful to have the message below on every boot (especially when we are using early silicon):
U-Boot 2015.10-rc2-23945-g37cf215 (Sep 08 2015 - 14:12:14 -0300) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0 - invalid sensor device , so turn the error message into debug level. Signed-off-by: Fabio Estevam <[email protected]> --- arch/arm/imx-common/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index e27546c..667b3f7 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -205,9 +205,9 @@ int print_cpuinfo(void) if (!ret) printf(" at %dC\n", cpu_tmp); else - puts(" - invalid sensor data\n"); + debug(" - invalid sensor data\n"); } else { - puts(" - invalid sensor device\n"); + debug(" - invalid sensor device\n"); } #endif -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
