From: Fabio Estevam <[email protected]> Make the internal symbols static when possible.
This prevents sparse build warnings. Signed-off-by: Fabio Estevam <[email protected]> --- board/freescale/mx7dsabresd/mx7dsabresd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index d163bee..6bd47df 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -44,7 +44,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC, .gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC, @@ -156,7 +156,7 @@ static enum qn_func qn_output[8] = { qn_enable }; -void iox74lv_init(void) +static void iox74lv_init(void) { int i; @@ -527,11 +527,11 @@ int checkboard(void) } #ifdef CONFIG_USB_EHCI_MX7 -iomux_v3_cfg_t const usb_otg1_pads[] = { +static iomux_v3_cfg_t const usb_otg1_pads[] = { MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t const usb_otg2_pads[] = { +static iomux_v3_cfg_t const usb_otg2_pads[] = { MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), }; -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
