On 28 September 2015 at 16:14, Tom Rini <[email protected]> wrote: > On Wed, Sep 23, 2015 at 10:25:37AM -0700, Ryan Harkin wrote: > > > Create an additional FVP configuration to boot images pre-loaded into > > DRAM. > > > > Sometimes it's preferential to boot the model by loading the files > > directly into DRAM via model parameters, rather than using > > SemiHosting. > > > > An example of model parmaters that are used to pre-load the files > > into DRAM: > > --data cluster0.cpu0=Image@0x80080000 \ > > --data cluster0.cpu0=fvp-base-gicv2-psci.dtb@0x83000000 \ > > --data cluster0.cpu0=uInitrd@0x84000000 > > > > Signedoff-by: Ryan Harkin <[email protected]> > > Reviewed-by: Linus Walleij <[email protected]> > > CC: David Feng <[email protected]> > > CC: Bhupesh Sharma <[email protected]> > > CC: Linus Walleij <[email protected]> > > --- > > arch/arm/Kconfig | 4 ++++ > > configs/vexpress_aemv8a_dram_defconfig | 19 +++++++++++++++++++ > > Make sure you add an entry to board/armltd/vexpress64/MAINTAINERS for this > board too so buildman doesn't warn about a missing maintainer. Thanks! >
Good point, thanks. I'll do it for v2. > > -- > Tom > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
