Hi Fabio,
On 29.09.2015 04:45, Fabio Estevam wrote:
From: Fabio Estevam <[email protected]>
Many SPI flashes have protection bits (BP2, BP1 and BP0) in the
status register that can protect selected regions of the SPI NOR.
Take these bits into account when performing erase operations,
making sure that the protected areas are skipped.
Introduce the CONFIG_SF_STM_PROTECT option that can be selected
by systems that want to protect regions of SPI NOR flash using
the same programming model as in the ST Micro SPI NOR flashes, like
for example the M25P32.
Based on the implementation from Brian Norris <[email protected]>
for the Linux kernel:
https://patchwork.ozlabs.org/patch/513041/
Tested on a mx6qsabresd:
=> sf probe
SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB
=> sf protect on 0x3f0000 0x10000
=> sf erase 0x3f0000 0x10000
offset 0x3f0000 is protected and cannot be erased
SF: 65536 bytes @ 0x3f0000 Erased: ERROR
=> sf protect off 0x3f0000 0x10000
=> sf erase 0x3f0000 0x10000
SF: 65536 bytes @ 0x3f0000 Erased: OK
Signed-off-by: Fabio Estevam <[email protected]>
---
README | 12 +++
common/cmd_sf.c | 30 +++++++
drivers/mtd/spi/sf_internal.h | 6 --
drivers/mtd/spi/sf_ops.c | 188 ++++++++++++++++++++++++++++++++++++++++++
include/spi_flash.h | 25 +++++-
5 files changed, 253 insertions(+), 8 deletions(-)
diff --git a/README b/README
index a13705a..3411ea9 100644
--- a/README
+++ b/README
@@ -3068,6 +3068,18 @@ CBFS (Coreboot Filesystem) support
memories can be connected with a given cs line.
Currently Xilinx Zynq qspi supports these type of connections.
+ CONFIG_SF_STM_PROTECT
+
+ Enable the built-in protection mechanism provided by the
+ BP2, BP1 and BP0 bits from the status register present
+ on ST-Micro flashes such as M25P32. Please refer to the
+ M25P32 datasheet to understand how to program these bits
+ in order to protect a selected region of the SPI NOR flash.
+ This same bit protection programming model applies to SPI
+ NOR flashes from other manufacturers such as:
+ - Micron M25P32
+ - SST SST25V32B
We should not add more CONFIG_ descriptions to this README. Please
add this option via Kconfig (in drivers/mtd/spi/Kconfig) and add
its description there as well.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
