Every TPM drivers should now depends on DM_TPM and not only TPM.
Signed-off-by: Christophe Ricard <christophe-h.ric...@st.com>
Reviewed-by: Tom Rini <tr...@konsulko.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/tpm/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig
index ff2cdbe..3ab652c 100644
--- a/drivers/tpm/Kconfig
+++ b/drivers/tpm/Kconfig
@@ -24,7 +24,7 @@ config TPM_TIS_SANDBOX
config TPM_ATMEL_TWI
bool "Enable Atmel TWI TPM device driver"
- depends on TPM && DM_I2C
+ depends on DM_TPM && DM_I2C
help
This driver supports an Atmel TPM device connected on the I2C bus.
The usual tpm operations and the 'tpm' command can be used to talk
@@ -33,7 +33,7 @@ config TPM_ATMEL_TWI
config TPM_TIS_INFINEON
bool "Enable support for Infineon SLB9635/45 TPMs on I2C"
- depends on TPM && DM_I2C
+ depends on DM_TPM && DM_I2C
help
This driver supports Infineon TPM devices connected on the I2C bus.
The usual tpm operations and the 'tpm' command can be used to talk
@@ -57,7 +57,7 @@ config TPM_TIS_I2C_BURST_LIMITATION_LEN
config TPM_TIS_LPC
bool "Enable support for Infineon SLB9635/45 TPMs on LPC"
- depends on TPM && X86
+ depends on DM_TPM && X86
help
This driver supports Infineon TPM devices connected on the I2C bus.
The usual tpm operations and the 'tpm' command can be used to talk
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
