On Wed, 2015-10-14 at 13:27 +0200, Albert ARIBAUD wrote: > On Wed, 14 Oct 2015 13:21:41 +0200, Albert ARIBAUD (3ADEV) > <[email protected]> wrote: > > Hello Stefan, > > > > On Tue, 13 Oct 2015 22:11:42 -0700, Stefan Agner <[email protected]> > > wrote: > > > This resyncs the driver changes with the Linux version of the > > > driver. The driver received some feedback in the LKML and got > > > recently acceppted, the latest version can be found here: > > > https://lkml.org/lkml/2015/9/2/678 > > > > > > Notable changes are: > > > - On ECC error, reread OOB and count bit flips in OOB too. > > > If flipped bits are below threshold, also return an empty > > > OOB buffer. > > > - Return the amount of bit flips in vf610_nfc_read_page. > > > - Use endianness aware vf610_nfc_read to read ECC status. > > > - Do not enable IDLE IRQ (since we do not operate with an > > > interrupt service routine). > > > - Use type safe struct for buffer variants (vf610_nfc_alt_buf). > > > - Renamed variables in struct vf610_nfc (column and page_sz) > > > to reflect better what they really representing. > > > > > > The U-Boot version currently does not support RAW NAND write > > > when using the HW ECC engine. > > > > > > Signed-off-by: Bhuvanchandra DV <[email protected]> > > > Signed-off-by: Stefan Agner <[email protected]> > > > > Tested-by: Albert ARIBAUD (3ADEV) <[email protected]> > > Putting Stefano Babic in To: list since this is IMX-like stuff. > > Stefano, > > I can pick this plus Stefan's other two and Anthony's vf610-related > patches if you want, or you can. Either way, Tom will take them as they > are essentially bugfixes.
Acked-by: Scott Wood <[email protected]> -Scott _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
