Fill the right command type when using CMD12 to stop data transfer.
Signed-off-by: Yangbo Lu <[email protected]>
---
drivers/mmc/fsl_esdhc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 0b37002..69c0728 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -106,7 +106,8 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct
mmc_data *data)
xfertyp |= XFERTYP_RSPTYP_48;
#if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240) || \
- defined(CONFIG_LS102XA) || defined(CONFIG_LS2085A)
+ defined(CONFIG_LS102XA) || defined(CONFIG_LS2085A) \
+ defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080)
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
xfertyp |= XFERTYP_CMDTYP_ABORT;
#endif
--
2.1.0.27.g96db324
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
