Dear Kim Phillips, In message <20090727185329.874ef2ae.kim.phill...@freescale.com> you wrote: > Hi Wolfgang, please pull (mostly) support for the VME8349 board (it's > initial patch was posted well in advance of the window) and a couple of > fixes: > > The following changes since commit 94978e19f31d225b4f7d97c4acbac1ecfaeb8f69: > Wolfgang Denk (1): > Prepare 2009.08-rc1 (again, after fixing last minute issues). > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc83xx.git master > > Kim Phillips (1): > mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; > remove the former > > Paul Gortmaker (1): > sbc8349: combine HRCW flash and u-boot image flash > > Reinhard Arlt (1): > mpc83xx: Add esd VME8349 board support > > MAINTAINERS | 2 + > MAKEALL | 1 + > Makefile | 2 + > board/esd/vme8349/Makefile | 54 ++++ > board/esd/vme8349/caddy.c | 194 +++++++++++++ > board/esd/vme8349/caddy.h | 77 ++++++ > board/esd/vme8349/config.mk | 28 ++ > board/esd/vme8349/pci.c | 119 ++++++++ > board/esd/vme8349/vme8349.c | 140 ++++++++++ > board/sbc8349/config.mk | 2 +- > cpu/mpc83xx/Makefile | 4 +- > doc/README.sbc8349 | 30 ++- > drivers/pci/pci_auto.c | 2 +- > include/configs/MPC8313ERDB.h | 1 - > include/configs/MPC8315ERDB.h | 3 +- > include/configs/MPC8323ERDB.h | 1 - > include/configs/MPC832XEMDS.h | 1 - > include/configs/MPC8349EMDS.h | 4 - > include/configs/MPC8349ITX.h | 1 - > include/configs/MPC8360EMDS.h | 1 - > include/configs/MPC8360ERDK.h | 1 - > include/configs/MPC837XEMDS.h | 3 +- > include/configs/MPC837XERDB.h | 3 +- > include/configs/MVBLM7.h | 1 - > include/configs/SIMPC8313.h | 1 - > include/configs/TQM834x.h | 1 - > include/configs/sbc8349.h | 5 +- > include/configs/vme8349.h | 608 > +++++++++++++++++++++++++++++++++++++++++ > 28 files changed, 1254 insertions(+), 36 deletions(-) > create mode 100644 board/esd/vme8349/Makefile > create mode 100644 board/esd/vme8349/caddy.c > create mode 100644 board/esd/vme8349/caddy.h > create mode 100644 board/esd/vme8349/config.mk > create mode 100644 board/esd/vme8349/pci.c > create mode 100644 board/esd/vme8349/vme8349.c > create mode 100644 include/configs/vme8349.h
Applied, thanks. But please do not reqrite the Subject of committed patches, at least not without specifically mentioning it here. My "patch tracking" is based on the Subject: lines, and it causes additional work (and eventually introduces errors) when you rename the original (poor, agreed) Subject "mpc83xx: because CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI, we remove the former" into "mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former" - which is still _way_too_long_, btw. Rather reject the patch and ask for a resubmit. Even from yourself :-) Thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Of course there's no reason for it, it's just our policy. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot