Do not enable both I2C controllers by default. Enable them only when they are selected.
Signed-off-by: Michal Simek <[email protected]> --- drivers/i2c/zynq_i2c.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c index b3264af4526e..380863bde148 100644 --- a/drivers/i2c/zynq_i2c.c +++ b/drivers/i2c/zynq_i2c.c @@ -297,11 +297,15 @@ static unsigned int zynq_i2c_set_bus_speed(struct i2c_adapter *adap, return 0; } +#ifdef CONFIG_ZYNQ_I2C0 U_BOOT_I2C_ADAP_COMPLETE(zynq_0, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read, zynq_i2c_write, zynq_i2c_set_bus_speed, CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE, 0) +#endif +#ifdef CONFIG_ZYNQ_I2C1 U_BOOT_I2C_ADAP_COMPLETE(zynq_1, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read, zynq_i2c_write, zynq_i2c_set_bus_speed, CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE, 1) +#endif -- 2.5.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
