Current implementation only consider SGMIIs for dpmac initialization. XFI serdes protocols also uses dpmac.
Also, fix lane protocol parsing logic to consider both XFIs and SGMIIs. Signed-off-by: Prabhakar Kushwaha <[email protected]> --- Changes for v2: Sending as it is Changes for v3: Sending as it is Changes for v4: Update SerDes Parsing logic .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 25 ++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c index 2ab8da6..918e889 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c @@ -18,6 +18,11 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT]; static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT]; #endif +#ifdef CONFIG_FSL_MC_ENET +int xfi_dpmac[XFI8 + 1]; +int sgmii_dpmac[SGMII16 + 1]; +#endif + int is_serdes_configured(enum srds_prtcl device) { int ret = 0; @@ -116,9 +121,15 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift, wriop_init_dpmac(sd, 12, (int)lane_prtcl); break; default: + if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8) + wriop_init_dpmac(sd, + xfi_dpmac[lane_prtcl], + (int)lane_prtcl); + if (lane_prtcl >= SGMII1 && - lane_prtcl <= SGMII16) - wriop_init_dpmac(sd, lane + 1, + lane_prtcl <= SGMII16) + wriop_init_dpmac(sd, sgmii_dpmac[ + lane_prtcl], (int)lane_prtcl); break; } @@ -129,6 +140,16 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift, void fsl_serdes_init(void) { +#ifdef CONFIG_FSL_MC_ENET + int i , j; + + for (i = XFI1, j = 1; i <= XFI8; i++, j++) + xfi_dpmac[i] = j; + + for (i = SGMII1, j = 1; i <= SGMII16; i++, j++) + sgmii_dpmac[i] = j; +#endif + #ifdef CONFIG_SYS_FSL_SRDS_1 serdes_init(FSL_SRDS_1, CONFIG_SYS_FSL_LSCH3_SERDES_ADDR, -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
