Hi Lin, On 9 November 2015 at 00:02, Lin Huang <h...@rock-chips.com> wrote: > This add some basic files required to allow the board to dispaly > serial message and can run command(mmc info etc) > > Signed-off-by: Lin Huang <h...@rock-chips.com> > --- > Changes in v1: > - clean copyright announcement > Changes in v2: > - get sdram info from evb_rk3036.c > Changes in v3: > - delete some config > Changes in v4: None > > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/rk3036-sdk.dts | 46 ++++++++++++++++++++++++++++++ > board/evb_rk3036/evb_rk3036/Kconfig | 15 ++++++++++ > board/evb_rk3036/evb_rk3036/MAINTAINERS | 0 > board/evb_rk3036/evb_rk3036/Makefile | 7 +++++ > board/evb_rk3036/evb_rk3036/evb_rk3036.c | 48 > ++++++++++++++++++++++++++++++++ > configs/evb-rk3036_defconfig | 25 +++++++++++++++++ > include/configs/evb_rk3036.h | 12 ++++++++ > 8 files changed, 155 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/rk3036-sdk.dts > create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig > create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS > create mode 100644 board/evb_rk3036/evb_rk3036/Makefile > create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c > create mode 100644 configs/evb-rk3036_defconfig > create mode 100644 include/configs/evb_rk3036.h
I wonder if there is a better way to get the SDRAM config, but this will do for now. Acked-by: Simon Glass <s...@chromium.org> Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
