Dear oa...@yahoo.com,
In message <1249383697-28141-2-git-send-email-oa...@yahoo.com> you wrote:
> From: Alex Dubov <oa...@yahoo.com>
>
> STx AMC8548 board is an old, AMC form factor, MPC8548 based board intended
> for RapidIO applications. It features 16MiB NAND flash, one DDR2 soDIMM
> slot, ethernet on front panel and backplane, RapidIO on backplane, USB
> controller on local bus (not currently enabled) and no PCI of any kind.
>
> Signed-off-by: Alex Dubov <oa...@yahoo.com>
> ---
> Makefile | 3 +
> board/stx/stxamc8548/Makefile | 51 ++++++
> board/stx/stxamc8548/config.mk | 32 ++++
> board/stx/stxamc8548/stxamc8548.c | 168 +++++++++++++++++++
> board/stx/stxamc8548/u-boot.lds | 143 ++++++++++++++++
> include/configs/stxamc8548.h | 332
> +++++++++++++++++++++++++++++++++++++
> 6 files changed, 729 insertions(+), 0 deletions(-)
> create mode 100644 board/stx/stxamc8548/Makefile
> create mode 100644 board/stx/stxamc8548/config.mk
> create mode 100644 board/stx/stxamc8548/stxamc8548.c
> create mode 100644 board/stx/stxamc8548/u-boot.lds
> create mode 100644 include/configs/stxamc8548.h
What's the difference between this patch and the previously submitted
one:
Subject: [U-Boot] [PATCH 2/2] stx: add support for AMC8548 board
From: Alex Dubov <oa...@yahoo.com>
Date: Tue, 4 Aug 2009 02:26:49 -0700 (PDT)
?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
We want to create puppets that pull their own strings. - Ann Marion
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
