Hi Simon, Marek,

On Wed, 2015-11-18 at 18:26 +0300, Alexey Brodkin wrote:
> This driver is meant to be used with any EHCI-compatible host
> controller in case if there's no need for platform-specific
> glue such as setup of controller or PHY's power mode via
> GPIOs etc.
> 
> Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
> Reviewed-by: Simon Glass <s...@chromium.org>
> Reviewed-by: Marek Vasut <ma...@denx.de>
> Cc: Stephen Warren <swar...@nvidia.com>
> ---
> 
> Changes compared to v1:
>  * Updated commit message with removal of Synopsys board mention
>  * Cleaned-up ehci_usb_remove()
> 
>  drivers/usb/host/Kconfig        |  7 ++++++
>  drivers/usb/host/Makefile       |  1 +
>  drivers/usb/host/ehci-generic.c | 51 
> +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 59 insertions(+)
>  create mode 100644 drivers/usb/host/ehci-generic.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 2a2bffe..a500578 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -73,4 +73,11 @@ config USB_EHCI_UNIPHIER
>       ---help---
>         Enables support for the on-chip EHCI controller on UniPhier SoCs.
>  
> +config USB_EHCI_GENERIC
> +     bool "Support for generic EHCI USB controller"
> +     depends on OF_CONTROL
> +     default y
> +     ---help---
> +       Enables support for generic EHCI controller.
> +
>  endif
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index f70f38c..b9b4471 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -32,6 +32,7 @@ else
>  obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
>  endif
>  obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
> +obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
>  obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
>  obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
>  obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
> diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
> new file mode 100644
> index 0000000..f0e2b85
> --- /dev/null
> +++ b/drivers/usb/host/ehci-generic.c
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (C) 2015 Alexey Brodkin <abrod...@synopsys.com>
> + *
> + * SPDX-License-Identifier:  GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include "ehci.h"
> +
> +/*
> + * Even though here we don't explicitly use "struct ehci_ctrl"
> + * ehci_register() expects it to be the first thing that resides in
> + * device's private data.
> + */
> +struct generic_ehci {
> +     struct ehci_ctrl ctrl;
> +};
> +
> +static int ehci_usb_probe(struct udevice *dev)
> +{
> +     struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
> +     struct ehci_hcor *hcor;
> +
> +     hcor = (struct ehci_hcor *)((uint32_t)hccr +
> +                                 HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> +
> +     return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
> +}
> +
> +static int ehci_usb_remove(struct udevice *dev)
> +{
> +     return ehci_deregister(dev);
> +}
> +
> +static const struct udevice_id ehci_usb_ids[] = {
> +     { .compatible = "generic-ehci" },
> +     { }
> +};
> +
> +U_BOOT_DRIVER(usb_ehci) = {
> +     .name   = "ehci_generic",
> +     .id     = UCLASS_USB,
> +     .of_match = ehci_usb_ids,
> +     .probe = ehci_usb_probe,
> +     .remove = ehci_usb_remove,
> +     .ops    = &ehci_usb_ops,
> +     .priv_auto_alloc_size = sizeof(struct generic_ehci),
> +     .flags  = DM_FLAG_ALLOC_PRIV_DMA,
> +};
> +

Any comments on that one or there's a chance it could be applied?

-Alexey
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to