Hi, On Sun, Nov 22, 2015 at 11:40 PM, Hans de Goede <[email protected]> wrote: > Hi, > > On 22-11-15 15:14, Chen-Yu Tsai wrote: >> >> On Sat, Nov 21, 2015 at 11:48 PM, Ian Campbell <[email protected]> >> wrote: >>> >>> On Fri, 2015-11-20 at 19:32 +0100, Hans de Goede wrote: >>>> >>>> According to the datasheets the max speed of AHB1 is 276 MHz, so >>>> setting it to PLL6 / 3 which gives us 200MHz everywhere is fine, >>>> and gives us a nice speed-up in certain workloads. >>>> >>>> Suggested-by: Chen-Yu Tsai <[email protected]> >>>> Signed-off-by: Hans de Goede <[email protected]> >>> >>> >>> I suppose you've tested this on at least one such board? In that case: >>> Acked-by: Ian Campbell <[email protected]> >> >> >> I've tested this on some of my boards. It works fine on my Hummingbird A31 >> and A23 Q8 tablet. However my Sinlinx SinA33 is giving me kernel Oops >> which >> I haven't looked into yet. > > > Works for me on a q8 A33 tablet. But lets investigate your oops before > including > this in the next pull-req. Thanks for the testing!
I retested it with a proper clean build, and it works now. No idea what the oops was about. Also tested on my Sinlinx SinA31s. So it now works on all my sun6i generation boards. Tested-by: Chen-Yu Tsai <[email protected]> _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
