> -----Original Message----- > From: York Sun [mailto:[email protected]] > Sent: Tuesday, November 24, 2015 12:49 AM > To: Kushwaha Prabhakar-B32579 <[email protected]>; u- > [email protected] > Cc: Srivastava Pratiyush-B46174 <[email protected]> > Subject: Re: [PATCH 1/2][v2] armv8: LS2080A: Rename LS2085A to reflect > LS2080A > > > > On 11/09/2015 03:12 AM, Prabhakar Kushwaha wrote: > > LS2080A is a prime personality of Freescale’s LS2085A. It is a > > non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe > endpoint etc. > > So renaming existing LS2085A code base to reflect LS2080A (Prime > > personality) > > > > Signed-off-by: Pratiyush Mohan Srivastava > > <[email protected]> > > Signed-off-by: Prabhakar Kushwaha <[email protected]> > > --- > > Changes for v2: Rebased on LS1043 patch set > > <snip> > > > diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h > > b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h > > index 2903996..5a91dcb 100644 > > --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h > > +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h > > @@ -8,8 +8,10 @@ > > #define _FSL_LAYERSCAPE_CPU_H > > > > static struct cpu_type cpu_type_list[] = { > > - CPU_TYPE_ENTRY(LS2085, LS2085, 8), > > +#ifdef CONFIG_LS2080A > > CPU_TYPE_ENTRY(LS2080, LS2080, 8), > > +#endif > > + CPU_TYPE_ENTRY(LS2085, LS2085, 8), > > CPU_TYPE_ENTRY(LS2045, LS2045, 4), > > CPU_TYPE_ENTRY(LS1043, LS1043, 4), > > }; > > Why using ifdef here?
I am trying to reduce size of table. Instead of adding all SoC in table only defined the required one at a time. --prabhakar _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
