On Thursday, November 26, 2015 at 01:51:17 PM, Florian Achleitner wrote: > On Thursday, November 26, 2015 12:06:42 PM Marek Vasut wrote: > > On Thursday, November 26, 2015 at 10:24:50 AM, Florian Achleitner wrote: > > > Hi, > > > > Hi, > > > > > for everybody's information: > > > > > > On Wednesday, November 18, 2015 11:01:03 AM Marek Vasut wrote: > > > > On Wednesday, November 18, 2015 at 10:57:13 AM, Florian Achleitner > > wrote: > > > > > On Wednesday, November 18, 2015 09:55:12 AM Marek Vasut wrote: > > > > > > > > > > [..] > > > > > Anyways, I currently suspect the cst tool in its current version > > > > > (2.3.1) to > > > > > produce binaries that are incompatible with the mx28 HAB Rom. > > > > > However, I couldn't find an older version of the cst yet, so I > > > > > can't try it at the moment. > > > > > > > > [...] > > > > > > > > I am using BLN_CST_MAIN_02.00.00 btw. > > > > > > I eventually got version BLN_CST_MAIN_02.00.00 from freescale support, > > > and it works nicely with the i.mx28 HAB. > > > > > > Thus, I'm quite sure that the current version BLN_CST_MAIN_02.03.00 is > > > simply broken at least for i.mx28. > > > > Thanks for the heads up! Would it be possible for you to check what's the > > problem and submit a patch to make both versions work please? > > I guess, no. I think there is nothing to be done on u-boot's side. From the > outside, the cst still looks the same, all inputs are the same. And this > tool is known to be closed-source. I can only compare the output. The > binary it produces differs significantly between the two versions. This > must bei fixed by freescale in the cst. Their support promised to forward > the issue.
Please keep an eye on them at least. Thanks! Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
