On 11/11/2015 01:58 AM, Gong Qianyu wrote: > From: Shaohui Xie <[email protected]> > > LS1043AQDS Specification: > ------------------------- > Memory subsystem: > * 2GByte DDR4 DIMM > * 128 Mbyte NOR flash single-chip memory > * 512 Mbyte NAND flash > * 16 Mbyte high-speed SPI flash > * SD connector to interface with the SD memory card > > Ethernet: > * Two RGMII ports > * XFI 10G port > * SGMII > * QSGMII with 4x 1G ports > > PCIe: supports Gen 1 and Gen 2 > > SATA 3.0: one SATA 3.0 port > > USB 3.0: two micro AB connector and one type A connector > > UART: supports two UARTs up to 115200 bps for console > > Signed-off-by: Shaohui Xie <[email protected]> > Signed-off-by: Mingkai Hu <[email protected]> > Signed-off-by: Hou Zhiqiang <[email protected]> > Signed-off-by: Gong Qianyu <[email protected]> > --- > V4: > - Fix vid macros in config file and add vid support. > - Remove RAW_TIMING definition for DDR3. > - Remove LS1043AQDS_MDIO_10GC related code because LS1043AQDS has no phy for > it. > V3: > - Update the commit message. > - Remove #ifdef in fdt.h. > - Rename ls1043aqds_sdcard_defconfig to ls1043aqds_sdcard_ifc_defconfig. > V2: > - No change. > > arch/arm/Kconfig | 9 + > arch/arm/include/asm/arch-fsl-layerscape/fdt.h | 1 + > board/freescale/common/vid.c | 22 + > board/freescale/ls1043aqds/Kconfig | 15 + > board/freescale/ls1043aqds/MAINTAINERS | 9 + > board/freescale/ls1043aqds/Makefile | 9 + > board/freescale/ls1043aqds/README | 96 ++++ > board/freescale/ls1043aqds/ddr.c | 131 ++++++ > board/freescale/ls1043aqds/ddr.h | 60 +++ > board/freescale/ls1043aqds/eth.c | 492 > +++++++++++++++++++++ > board/freescale/ls1043aqds/ls1043aqds.c | 333 ++++++++++++++ > board/freescale/ls1043aqds/ls1043aqds_pbi.cfg | 14 + > board/freescale/ls1043aqds/ls1043aqds_qixis.h | 39 ++ > board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg | 7 + > .../freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg | 8 + > configs/ls1043aqds_defconfig | 3 + > configs/ls1043aqds_nand_defconfig | 4 + > configs/ls1043aqds_nor_ddr3_defconfig | 2 + > configs/ls1043aqds_sdcard_ifc_defconfig | 4 + > include/configs/ls1043aqds.h | 387 ++++++++++++++++ > 20 files changed, 1645 insertions(+)
Added CONFIG_SYS_NS16550=y in defconfig files. Applied to fsl-qoriq master. Thanks. York _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
