On 12/03/2015 05:25 PM, Jagan Teki wrote: > On 23 November 2015 at 17:43, Vignesh R <vigne...@ti.com> wrote: >> ti-qspi driver currently uses 3-byte addressing mode(and opcodes) for >> memory-mapped read. This restricts maximum addressable flash size to >> 16MB. >> Enable the 4-byte addressing(and use 4-byte opcode) for memory-mapped >> read to allow access to addresses above 16MB. > > What about sf side, since we don't have 4-byte opcode support yet? >
Well, the sf is accessing >16MB address space using EXT_ADDR registers via BAR support (for regular spi read/write). But, memory-mapped read doesn't support using EXT_ADDR, hence 4-byte opcode needs to be used for during mmap transfers to access >16MB. >> >> Signed-off-by: Ravi Babu <ravib...@ti.com> >> [vigne...@ti.com: Re-word commit description] >> Signed-off-by: Vignesh R <vigne...@ti.com> >> >> --- >> >> Tested on DRA74 EVM with Spansion flash and AM437X IDK EVM with Macronix >> flash. >> >> drivers/spi/ti_qspi.c | 6 +++--- >> 1 file changed, 3 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c >> index 646dd899d3ec..0a032845866d 100644 >> --- a/drivers/spi/ti_qspi.c >> +++ b/drivers/spi/ti_qspi.c >> @@ -48,14 +48,14 @@ >> #define CORE_CTRL_IO 0x4a002558 >> >> #define QSPI_CMD_READ (0x3 << 0) >> -#define QSPI_CMD_READ_QUAD (0x6b << 0) >> +#define QSPI_CMD_READ_QUAD (0x6c << 0) >> #define QSPI_CMD_READ_FAST (0x0b << 0) >> -#define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8) >> +#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8) >> #define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10) >> #define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10) >> #define QSPI_SETUP0_READ_NORMAL (0x0 << 12) >> #define QSPI_SETUP0_READ_QUAD (0x3 << 12) >> -#define QSPI_CMD_WRITE (0x2 << 16) >> +#define QSPI_CMD_WRITE (0x12 << 16) >> #define QSPI_NUM_DUMMY_BITS (0x0 << 24) >> >> /* ti qspi register set */ >> -- >> 2.6.3 >> > > thanks! > -- Regards Vignesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot