On Sunday, December 13, 2015 at 05:17:54 AM, Stefan Brüns wrote:
> A function is allowed to return NAKs during the DATA stage to control
> data flow control. NAKs during the STATUS stage signal the function
> is still processing the request.
> 
> Signed-off-by: Stefan Brüns <[email protected]>
> ---
>  drivers/usb/host/dwc2.c | 37 ++++++++++++++++++++++++-------------
>  1 file changed, 24 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
> index 5ef6deb..db3acd4 100644
> --- a/drivers/usb/host/dwc2.c
> +++ b/drivers/usb/host/dwc2.c
> @@ -892,8 +892,8 @@ static int _submit_control_msg(struct dwc2_priv *priv,
> struct usb_device *dev, {
>       int devnum = usb_pipedevice(pipe);
>       int pid, ret, act_len;
> -     /* For CONTROL endpoint pid should start with DATA1 */
>       int status_direction;
> +     unsigned long timeout;
> 
>       if (devnum == priv->root_hub_devnum) {
>               dev->status = 0;
> @@ -907,26 +907,37 @@ static int _submit_control_msg(struct dwc2_priv
> *priv, struct usb_device *dev, if (ret)
>               return ret;
> 
> +     timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
>       if (buffer) {
> +             /* DATA stage */
>               pid = DWC2_HC_PID_DATA1;
> -             ret = chunk_msg(priv, dev, pipe, &pid, usb_pipein(pipe), buffer,
> -                             len, false);
> +             act_len = 0;
> +             do {
> +                     if (get_timer(0) > timeout) {
> +                             printf("Timeout during CONTROL DATA stage\n");
> +                             return -ETIMEDOUT;
> +                     }
> +                     ret = chunk_msg(priv, dev, pipe, &pid, usb_pipein(pipe),
> +                                     buffer, len, false);
> +                     act_len += dev->act_len;
> +                     buffer += dev->act_len;
> +                     len -= dev->act_len;
> +             } while (len && (ret == -EAGAIN));

I can't say I'm a big fan of these conditions ^ . Can you rework a bit so it's
more obvious what the code does ? The condition in the while (cond) is really
inobvious at a first glance.

>               if (ret)
>                       return ret;
> -             act_len = dev->act_len;
> -     } /* End of DATA stage */
> -     else
> +             status_direction = usb_pipeout(pipe);
> +     } else {
> +             /* No-data CONTROL always ends with an IN transaction */
> +             status_direction = 1;
>               act_len = 0;
> +     }

Otherwise:
Acked-by: Marek Vasut <[email protected]>
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to