Dear Ben Warren, I wrote:
> Note however that your modification was probably not the (only) > culprit. With current mainline version I get this: > > TRAB # run load > TFTP from server 192.168.1.1; our IP address is 192.168.3.68 > Filename 'trab/u-boot.bin-wd'. > Load address: 0xc100000 > Loading: T T T T T T T T T T > Retry count exceeded; starting again > TFTP from server 192.168.1.1; our IP address is 192.168.3.68 > Filename 'trab/u-boot.bin-wd'. > Load address: 0xc100000 > Loading: T T T T T T T T T T > Retry count exceeded; starting again > TFTP from server 192.168.1.1; our IP address is 192.168.3.68 > Filename 'trab/u-boot.bin-wd'. > Load address: 0xc100000 > Loading: T T T T T T T T T T > Retry count exceeded; starting again > > with the timeouts being *way* too fast. > > It seems that 1.2.0 was the last version that has been actually > tested on trab / SMDK2400. > > I'll try to run a git bisect tomorrow; need to get some sleep now. Please ignore me: U-Boot 2009.08-rc2-00016-g253cb83-dirty (Aug 13 2009 - 00:42:59) I2C: ready DRAM: 32 MB Flash: 8 MB USB: scanning bus for devices... 1 USB Device(s) found 0 Storage Device(s) found Enter password - autoboot in 5 sec... TRAB # run load TFTP from server 192.168.1.1; our IP address is 192.168.3.68 Filename 'trab/u-boot.bin-wd'. Load address: 0xc100000 Loading: ################ done Bytes transferred = 233844 (39174 hex) TRAB # So currrent mainline *is* working fine. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Any sufficiently advanced technology is indistinguishable from a rigged demo. - Andy Finkel, computer guy _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
