On 23 December 2015 at 20:39, Mugunthan V N <[email protected]> wrote: > Resending the patches as I have missed 01/17 patch while sending > v6 series > > This patch series enables ti_qspi to adopt driver model. This has > been tested on dra72, dra74 and am437x-sk evms (logs [1]). > Also pushed a branch for testing [2] > > This patch series is based on u-boot-spi/next and a fix for > Macronix flash Quad Enable as per the comments in thread [3]. > > [1]: http://pastebin.ubuntu.com/14164638/ > [2]: git://git.ti.com/~mugunthanvnm/ti-u-boot/mugunth-ti-u-boot.git dm-qspi-v6 > > Changes from v5->v6: > * Removed adding flash compatibles to flash driver and added > "spi-flash" compatible to dts as done by other flash devices. > > Changes from v4->v5: > * Adopt to latest spi framework changes by Jagan [3] and [4] > > [3]: http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/245039 > [4]: https://www.mail-archive.com/[email protected]/msg196464.html > > Changes from v3->v4: > * used op_mode_{t/r}x to hold flash tx/rx modes. > > Changes from v2->v3: > * removed usage of spi_slave structure in driver model and introduced > required variables in qspi priv itself. > * Used fdt_addr_cells() and fdt_size_cells() instead of hard-coding > size of each address-size pair. > * Changed qspi dts entries to be same as in kernel qspi dts patch for > avoiding future conflicts. > * Fixed some typos and added more info in commits. > * Added error check on chip select passed from framework. > * Removed un-used define QSPI_RD_DUAL. > > Changes from Initial version: > * Split "prepare driver for DM conversion" for easier review > * added memory map mode to the driver > * Fixed the cosmetic reviews from Simon > * Modified the dev_get_addr_index to adopt OF_TRANSULATE as well > and also removed code duplicate. > * Added compatibles for spi flashed found in DRA7xx and AM437x SK > > Mugunthan V N (17): > drivers: spi: ti_qspi: do not hard code chip select for memory map > configuration > drivers: spi:ti_qspi: change ti_qspi_slave to ti_qspi_priv for driver > model conversion > drivers: spi: ti_qspi: prepare driver for DM conversion > dm: core: Add a new api to get indexed device address > spi: Add support for dual and quad mode > dra7xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl > dts: dra7: add spi alias for qspi > drivers: spi: ti_qspi: convert driver to adopt device driver model > arm: dts: dra7: add qspi register maps for memory map and control > module > arm: dts: am437x-gp-evm: add spi-flash comaptible for flash > arm: dts: dra7-evm: add spi-flash comaptible for flash > arm: dts: dra72-evm: add spi-flash comaptible for flash > defconfig: dra72_evm: enable spi driver model > defconfig: dra74_evm: enable spi driver model > am43xx_evm: qspi: do not define DM_SPI and DM_SPI_FLASH for spl > arm: dts: am4372: add qspi register maps for memory map > defconfig: am437x_sk_evm: enable spi driver model
Applied to u-boot-spi/master thanks! -- Jagan. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
