Hi Cyrille, > I'm trying to generate a FIT kernel image. > > I'm using u-boot 1.3.4 / dtc 1.2.0. > > All seems ok when i generates the FIT image > > mkimage -l kernel.itb > > Created: Tue Aug 11 14:51:23 2009 > Image 0 (ker...@1) > Description: Vanilla Linux kernel > Type: Kernel Image > Compression: gzip compressed > Data Size: 1703896 Bytes = 1663.96 kB = 1.62 MB > Architecture: ARM > OS: Linux > Load Address: 0x00080000 > Entry Point: 0x00080000 > Hash node: 'h...@1' > Hash algo: crc32 > Hash value: 1566f6d1 > Hash len: 4 > Hash node: 'h...@2' > Hash algo: sha1 > Hash value: faa6d60d546a3f7fa85f414c28bcf261d1a9bc51 > Hash len: 20 > Default Configuration: 'con...@1' > Configuration 0 (con...@1) > Description: Boot Linux kernel > Kernel: ker...@1 > > But on u-boot prompt : > => iminfo > > ## Checking Image at 00900000 ... > Unknown image format! > > I don't masterise all. > > However, I have one question : > FIT image support ARM architecture ?? > All examples i found talk about PowerPC
I don't think that anybody tested FITs on ARM. On the other hand, the concept is generic, so _should_ be no real show stopper on the road. Otoh I would not be surprised if there are some minor problems waiting for you to find them.... For a start I'd try to include "CONFIG_FIT" in your configuration ;) Cheers Detlev -- Old mathematicians never die; they just lose some of their functions. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: [email protected] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
