From: Peng Fan <peng....@nxp.com>
Implement arch_auxiliary_core_up and arch_auxiliary_core_check_up.
arch_auxiliary_core_check_up is used to check whether M4 is running
or not. arch_auxiliary_core_up is to boot M4 core, the m4 core will
use the pc and stack which is set in arch_auxiliary_core_up to set R15
and R13 register and boot.
Signed-off-by: Ye.Li <ye...@nxp.com>
Signed-off-by: Peng Fan <peng....@nxp.com>
---
arch/arm/cpu/armv7/mx6/soc.c | 38 ++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-mx6/imx-regs.h | 5 +++++
2 files changed, 43 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index bf5ae8c..ab0ccb0 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -491,3 +491,41 @@ void imx_setup_hdmi(void)
writel(reg, &mxc_ccm->chsccdr);
}
#endif
+
+#ifdef CONFIG_IMX_BOOTAUX
+int arch_auxiliary_core_up(u32 core_id, u32 boot_private_data)
+{
+ struct src *src_reg;
+ u32 stack, pc;
+
+ if (!boot_private_data)
+ return -EINVAL;
+
+ stack = *(u32 *)boot_private_data;
+ pc = *(u32 *)(boot_private_data + 4);
+
+ /* Set the stack and pc to M4 bootROM */
+ writel(stack, M4_BOOTROM_BASE_ADDR);
+ writel(pc, M4_BOOTROM_BASE_ADDR + 4);
+
+ /* Enable M4 */
+ src_reg = (struct src *)SRC_BASE_ADDR;
+ clrsetbits_le32(&src_reg->scr, SRC_SCR_M4C_NON_SCLR_RST_MASK,
+ SRC_SCR_M4_ENABLE_MASK);
+
+ return 0;
+}
+
+int arch_auxiliary_core_check_up(u32 core_id)
+{
+ struct src *src_reg = (struct src *)SRC_BASE_ADDR;
+ unsigned val;
+
+ val = readl(&src_reg->scr);
+
+ if (val & SRC_SCR_M4C_NON_SCLR_RST_MASK)
+ return 0; /* assert in reset */
+
+ return 1;
+}
+#endif
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h
b/arch/arm/include/asm/arch-mx6/imx-regs.h
index b1de751..f5ce31c 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -438,6 +438,11 @@ struct src {
u32 gpr10;
};
+#define SRC_SCR_M4_ENABLE_OFFSET 22
+#define SRC_SCR_M4_ENABLE_MASK (1 << 22)
+#define SRC_SCR_M4C_NON_SCLR_RST_OFFSET 4
+#define SRC_SCR_M4C_NON_SCLR_RST_MASK (1 << 4)
+
/* GPR1 bitfields */
#define IOMUXC_GPR1_APP_CLK_REQ_N BIT(30)
#define IOMUXC_GPR1_PCIE_EXIT_L1 BIT(28)
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
