Now that we have added driver model support to the TSEC driver, convert ls1021atwr board to use it.
This depends on previous DM series for ls1021atwr: http://patchwork.ozlabs.org/patch/561855/ Signed-off-by: Bin Meng <[email protected]> --- arch/arm/cpu/armv7/ls102xa/cpu.c | 2 +- arch/arm/cpu/armv7/ls102xa/fdt.c | 10 ++++++++++ arch/arm/dts/ls1021a-twr.dts | 20 ++++++++++++++++++++ arch/arm/dts/ls1021a.dtsi | 18 ++++++++++++++++-- board/freescale/ls1021atwr/ls1021atwr.c | 2 +- configs/ls1021atwr_nor_defconfig | 2 +- configs/ls1021atwr_nor_lpuart_defconfig | 2 +- include/configs/ls1021atwr.h | 4 ++++ 8 files changed, 54 insertions(+), 6 deletions(-) diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index 2f0df65..ee6b5ea 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -297,7 +297,7 @@ int cpu_mmc_init(bd_t *bis) int cpu_eth_init(bd_t *bis) { -#ifdef CONFIG_TSEC_ENET +#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH) tsec_standard_init(bis); #endif diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index ae5e794..0a4944e 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <dm.h> #include <libfdt.h> #include <fdt_support.h> #include <asm/io.h> @@ -22,7 +23,11 @@ DECLARE_GLOBAL_DATA_PTR; void ft_fixup_enet_phy_connect_type(void *fdt) { +#ifndef CONFIG_DM_ETH struct eth_device *dev; +#else + struct udevice *dev; +#endif struct tsec_private *priv; const char *enet_path, *phy_path; char enet[16]; @@ -30,7 +35,12 @@ void ft_fixup_enet_phy_connect_type(void *fdt) int phy_node; int i = 0; uint32_t ph; +#ifndef CONFIG_DM_ETH char *name[3] = { "eTSEC1", "eTSEC2", "eTSEC3" }; +#else + char *name[3] = { "ethernet@2d10000", "ethernet@2d50000", + "ethernet@2d90000" }; +#endif for (; i < ARRAY_SIZE(name); i++) { dev = eth_get_dev_by_name(name[i]); diff --git a/arch/arm/dts/ls1021a-twr.dts b/arch/arm/dts/ls1021a-twr.dts index deabb12..2bfeb14 100644 --- a/arch/arm/dts/ls1021a-twr.dts +++ b/arch/arm/dts/ls1021a-twr.dts @@ -57,6 +57,26 @@ }; }; +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + &i2c0 { status = "okay"; }; diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi index ee0e554..2ecb345 100644 --- a/arch/arm/dts/ls1021a.dtsi +++ b/arch/arm/dts/ls1021a.dtsi @@ -352,13 +352,27 @@ }; mdio0: mdio@2d24000 { - compatible = "gianfar"; - device_type = "mdio"; + compatible = "fsl,tsec-mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x2d24000 0x4000>; }; + enet0: ethernet@2d10000 { + compatible = "fsl,tsec"; + reg = <0x2d10000 0x1000>; + }; + + enet1: ethernet@2d50000 { + compatible = "fsl,tsec"; + reg = <0x2d50000 0x1000>; + }; + + enet2: ethernet@2d90000 { + compatible = "fsl,tsec"; + reg = <0x2d90000 0x1000>; + }; + usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x8600000 0x1000>; diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index f82e567..d4d0cb9 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -245,7 +245,7 @@ int board_mmc_init(bd_t *bis) int board_eth_init(bd_t *bis) { -#ifdef CONFIG_TSEC_ENET +#if defined(CONFIG_TSEC_ENET) && !defined(CONFIG_DM_ETH) struct fsl_pq_mdio_info mdio_info; struct tsec_info_struct tsec_info[4]; int num = 0; diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig index ddda0b8..1c8d2c1 100644 --- a/configs/ls1021atwr_nor_defconfig +++ b/configs/ls1021atwr_nor_defconfig @@ -5,5 +5,5 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_DM=y -CONFIG_NETDEVICES=y +CONFIG_DM_ETH=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1021atwr_nor_lpuart_defconfig b/configs/ls1021atwr_nor_lpuart_defconfig index 3564736..aec5bf3 100644 --- a/configs/ls1021atwr_nor_lpuart_defconfig +++ b/configs/ls1021atwr_nor_lpuart_defconfig @@ -6,5 +6,5 @@ CONFIG_SYS_EXTRA_OPTIONS="LPUART" # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y CONFIG_DM=y -CONFIG_NETDEVICES=y +CONFIG_DM_ETH=y CONFIG_FSL_LPUART=y diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 317ba62..d30050e 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -348,6 +348,7 @@ #define CONFIG_TSEC_ENET #ifdef CONFIG_TSEC_ENET +#ifndef CONFIG_DM_ETH #define CONFIG_MII #define CONFIG_MII_DEFAULT_TSEC 1 #define CONFIG_TSEC1 1 @@ -370,6 +371,9 @@ #define TSEC3_PHYIDX 0 #define CONFIG_ETHPRIME "eTSEC1" +#else +#define CONFIG_ETHPRIME "ethernet@2d10000" +#endif #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB -- 1.8.2.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
