The most basic thing for clock is to enable it, but it is missing in this uclass.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com> Acked-by: Simon Glass <s...@chromium.org> --- Changes in v2: - Add clk_enable() function drivers/clk/clk-uclass.c | 10 ++++++++++ include/clk.h | 18 ++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index a5bef59..ac3909d 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -32,6 +32,16 @@ long clk_set_rate(struct udevice *dev, ulong rate) return ops->set_rate(dev, rate); } +int clk_enable(struct udevice *dev, int periph) +{ + struct clk_ops *ops = clk_get_ops(dev); + + if (!ops->enable) + return -ENOSYS; + + return ops->enable(dev, periph); +} + long clk_get_periph_rate(struct udevice *dev, int periph) { struct clk_ops *ops = clk_get_ops(dev); diff --git a/include/clk.h b/include/clk.h index 61bb468..de15999 100644 --- a/include/clk.h +++ b/include/clk.h @@ -33,6 +33,15 @@ struct clk_ops { long (*set_rate)(struct udevice *dev, ulong rate); /** + * enable() - Enable the clock for a peripheral + * + * @dev: clock provider + * @periph: Peripheral ID to enable + * @return zero on success, or -ve error code + */ + int (*enable)(struct udevice *dev, int periph); + + /** * get_periph_rate() - Get clock rate for a peripheral * * @dev: Device to check (UCLASS_CLK) @@ -71,6 +80,15 @@ long clk_get_rate(struct udevice *dev); long clk_set_rate(struct udevice *dev, ulong rate); /** + * clk_enable() - Enable the clock for a peripheral + * + * @dev: clock provider + * @periph: Peripheral ID to enable + * @return zero on success, or -ve error code + */ +int clk_enable(struct udevice *dev, int periph); + +/** * clk_get_periph_rate() - Get current clock rate for a peripheral * * @dev: Device to check (UCLASS_CLK) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot