From: Siva Durga Prasad Paladugu <[email protected]> Add quirk to disable high speed incase the high speed was broken.This solves the issue where the the controller is used in High Speed Mode and the the hold time requirement for the JEDEC/MMC 4.41 specification is NOT met. This timing issue is not on all boards and hence provided config option to enable it when required.
Signed-off-by: Siva Durga Prasad Paladugu <[email protected]> Signed-off-by: Emil Lenchak <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- drivers/mmc/zynq_sdhci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index f21ea524af9f..039ec16e91fe 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -24,6 +24,11 @@ static int arasan_sdhci_probe(struct udevice *dev) host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_BROKEN_R1B; + +#ifdef CONFIG_ZYNQ_HISPD_BROKEN + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; +#endif + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); add_sdhci(host, CONFIG_ZYNQ_SDHCI_MAX_FREQ, -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
