SD1 boot mode is using different bootmode values. Add support for this mode used on DC1.
Signed-off-by: Michal Simek <[email protected]> --- arch/arm/include/asm/arch-zynqmp/hardware.h | 3 ++- board/xilinx/zynqmp/zynqmp.c | 6 ++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/arch-zynqmp/hardware.h b/arch/arm/include/asm/arch-zynqmp/hardware.h index 5eec999d5f32..587938249e8f 100644 --- a/arch/arm/include/asm/arch-zynqmp/hardware.h +++ b/arch/arm/include/asm/arch-zynqmp/hardware.h @@ -66,7 +66,8 @@ struct iou_scntr_secure { #define BOOT_MODES_MASK 0x0000000F #define QSPI_MODE_24BIT 0x00000001 #define QSPI_MODE_32BIT 0x00000002 -#define SD_MODE 0x00000003 +#define SD_MODE 0x00000003 /* sd 0 */ +#define SD_MODE1 0x00000005 /* sd 1 */ #define NAND_MODE 0x00000004 #define EMMC_MODE 0x00000006 #define JTAG_MODE 0x00000000 diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index cf8d6a4a51db..6bdec205a773 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -94,6 +94,12 @@ int board_late_init(void) case EMMC_MODE: setenv("modeboot", "sdboot"); break; + case SD_MODE1: + setenv("modeboot", "sdboot1"); + break; + case NAND_MODE: + setenv("modeboot", "nandboot"); + break; default: printf("Invalid Boot Mode:0x%x\n", bootmode); break; -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
