From: Alexandre Messier <[email protected]> When configuring a PHY in fixed (forced) link mode, in order for the changes to be applied, either one of these conditions must be triggered: 1- PHY is reset 2- Autoneg is restarted 3- PHY transitions from power-down to power-up
Neither of these is currently done, so effectively the fixed link configuration is not applied in the PHY. Fix this by setting the Autoneg restart bit. Signed-off-by: Alexandre Messier <[email protected]> --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index a6023f1..1d8eed5 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -116,7 +116,7 @@ static int genphy_config_advert(struct phy_device *phydev) static int genphy_setup_forced(struct phy_device *phydev) { int err; - int ctl = 0; + int ctl = BMCR_ANRESTART; phydev->pause = phydev->asym_pause = 0; -- 1.8.3.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
