On 09.12.2015 05:29, Wenyou Yang wrote: > Due to introducing the new PLLB clock handle functions, > use these functions to clean up the PLLB enable code. > > Signed-off-by: Wenyou Yang <[email protected]>
Reviewed-by: Andreas Bießmann <[email protected]> > --- > > board/siemens/smartweb/smartweb.c | 6 +----- > board/siemens/taurus/taurus.c | 6 +----- > 2 files changed, 2 insertions(+), 10 deletions(-) > > diff --git a/board/siemens/smartweb/smartweb.c > b/board/siemens/smartweb/smartweb.c > index e7ee65c..47a60a7 100644 > --- a/board/siemens/smartweb/smartweb.c > +++ b/board/siemens/smartweb/smartweb.c > @@ -115,12 +115,8 @@ static void smartweb_macb_hw_init(void) > > void at91_udp_hw_init(void) > { > - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; > - > /* Enable PLLB */ > - writel(get_pllb_init(), &pmc->pllbr); > - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) > - ; > + at91_pllb_clk_enable(get_pllb_init()); > > /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ > at91_periph_clk_enable(ATMEL_ID_UDP); > diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c > index 9374064..b0385d8 100644 > --- a/board/siemens/taurus/taurus.c > +++ b/board/siemens/taurus/taurus.c > @@ -289,12 +289,8 @@ void spi_cs_deactivate(struct spi_slave *slave) > > void at91_udp_hw_init(void) > { > - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; > - > /* Enable PLLB */ > - writel(get_pllb_init(), &pmc->pllbr); > - while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) > - ; > + at91_pllb_clk_enable(get_pllb_init()); > > /* Enable UDPCK clock, MCK is enabled in at91_clock_init() */ > at91_periph_clk_enable(ATMEL_ID_UDP); > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
