From: Ye Li <ye...@nxp.com> The BOOTCFG value used by bmode for SABRESD eMMC boot are actually for SD card. Fixed the value to correct one.
Signed-off-by: Ye Li <ye...@nxp.com> Signed-off-by: Peng Fan <peng....@nxp.com> Reviewed-by: Stefano Babic <sba...@denx.de> Cc: Fabio Estevam <fabio.este...@nxp.com> --- Change V2: Fix commit log, following Fabio's comments. board/freescale/mx6sabresd/mx6sabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index d20953d..42f89ab 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -638,7 +638,7 @@ static const struct boot_mode board_boot_modes[] = { {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)}, {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, /* 8 bit bus width */ - {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {"emmc", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)}, {NULL, 0}, }; #endif -- 2.6.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot