On 01/31/2016 06:10 PM, Simon Glass wrote:
At present u-boot.bin holds the plain U-Boot binary without the device tree.
This is somewhat annoying since you need either u-boot.bin or u-boot-dtb.bin
depending on whether device tree is used.
This series adjusts the build such that u-boot.bin includes a device tree if
enabled, and the plain binary is in u-boot-nodtb.bin. For now u-boot-dtb.bin
remains the same.
This should be acceptable since:
- without OF_CONTROL, u-boot.bin still does not include a device tree
- with OF_CONTROL, u-boot-dtb.bin does not change
The main impact is to build systems which are set up to use u-boot.bin as
the output file and then add a device tree. These will have to change to use
u-boot-nodtb.bin instead.
The original decision to use a separate u-boot-dtb.bin was aimed at allowing
any device tree file to be concatenated to the u-boot.bin image after the
build. However this no-longer seems so important. More important is the
convenience of using the same output file regardless of the setting for
OF_CONTROL.
The series,
Tested-by: Stephen Warren <[email protected]
(Both out T124-and-before and T210-and-later flashing processes still
seem to work OK with the new file naming etc.)
Patches 1-3,
Reviewed-by: Stephen Warren <[email protected]>
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
