Before Linux boot DPL must be deployed to DPAA2 interface. So update bootcmd env variable to make sure DPL deployment before Linux boot.
Signed-off-by: Prabhakar Kushwaha <[email protected]> --- include/configs/ls2080a_common.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 0d33042..091c9e1 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -272,8 +272,9 @@ unsigned long long get_qixis_addr(void); "earlycon=uart8250,mmio,0x21c0500" \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=16" -#define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ - "$kernel_size && bootm $kernel_load" +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ + " cp.b $kernel_start $kernel_load" \ + " $kernel_size && bootm $kernel_load" #define CONFIG_BOOTDELAY 10 /* Monitor Command Prompt */ -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
