I have the same problem on a TI DM3730
On Thu, Feb 4, 2016 at 11:41 AM, Tom Rini <[email protected]> wrote: > On Tue, Feb 02, 2016 at 03:49:07PM +0100, Matthias Weißer wrote: > >> Hi >> >> 9c11135 image: fix getenv_bootm_size() function breaks the bootz >> command for me on a custom hardware (very similar to mx6sxsabresd but >> with only 256MB RAM). I don't have bootm_size or bootm_low defined. >> >> After reading zImage and dtb from serial flash I run >> >> => bootz 0x80800000 - 0x83000000 >> Kernel image @ 0x80800000 [ 0x000000 - 0x1e5f48 ] >> ## Flattened Device Tree blob at 83000000 >> Booting using the fdt blob at 0x83000000 >> ERROR: Failed to allocate 0xb28a bytes below 0x10000000. >> device tree - allocation error >> FDT creation failed! hanging...### ERROR ### Please RESET the board ### >> >> I am totally unsure what the commit intents but subtracting the ram >> start address from its size doesn't make much sense to me. >> >> + return gd->bd->bi_dram[0].size - (tmp - gd->bd->bi_dram[0].start); >> >> Maybe someone can shed some light on this issue for me. > > Masahiro? > > -- > Tom > > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
