Specify max_bus_width directly in usdhc_cfg static definition instead of tweaking it in the board_mmc_init() function.
Signed-off-by: Julien Corjon <[email protected]> --- v1 -> v2 - Split patch (suggested by Boris) - Replace spaces with tab (suggested by Boris) board/seco/mx6quq7/mx6quq7.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c index 3743a9e..89ae70d 100644 --- a/board/seco/mx6quq7/mx6quq7.c +++ b/board/seco/mx6quq7/mx6quq7.c @@ -92,8 +92,8 @@ int board_eth_init(bd_t *bis) } static struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, + {USDHC3_BASE_ADDR, 0, 4}, + {USDHC4_BASE_ADDR, 0, 4}, }; int board_mmc_init(bd_t *bis) @@ -112,12 +112,10 @@ int board_mmc_init(bd_t *bis) case 0: seco_mx6_setup_usdhc_iomux(3); usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[0].max_bus_width = 4; break; case 1: seco_mx6_setup_usdhc_iomux(4); usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - usdhc_cfg[1].max_bus_width = 4; break; default: -- 2.5.0 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
