In LS2080/LS2085, SFP is LE and Ver is 3.4
The base address is 0x01e80200
SFP will be used in Secure Boot to read fuses.

Signed-off-by: Aneesh Bansal <aneesh.ban...@nxp.com>
Signed-off-by: Saksham Jain <saksham.j...@nxp.com>
---
Changes for v2:
        - No changes
Changes for v3:
        - No changes
Changes for v4:
        - Cleaned up commit message

 arch/arm/include/asm/arch-fsl-layerscape/config.h      | 4 ++++
 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 3 +++
 include/fsl_sfp.h                                      | 3 ++-
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h 
b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index ff3b1be..997ff00a 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -67,6 +67,10 @@
 /* SMMU Defintions */
 #define SMMU_BASE                      0x05000000 /* GR0 Base */
 
+/* SFP */
+#define CONFIG_SYS_FSL_SFP_VER_3_4
+#define CONFIG_SYS_FSL_SFP_LE
+
 /* Cache Coherent Interconnect */
 #define CCI_MN_BASE                    0x04000000
 #define CCI_MN_RNF_NODEID_LIST         0x180
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h 
b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 91f3ce8..f1b021f 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -73,6 +73,9 @@
 #define AHCI_BASE_ADDR1                                (CONFIG_SYS_IMMR + 
0x02200000)
 #define AHCI_BASE_ADDR2                                (CONFIG_SYS_IMMR + 
0x02210000)
 
+/* SFP */
+#define CONFIG_SYS_SFP_ADDR            (CONFIG_SYS_IMMR + 0x00e80200)
+
 /* PCIe */
 #define CONFIG_SYS_PCIE1_ADDR                  (CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR                  (CONFIG_SYS_IMMR + 0x2500000)
diff --git a/include/fsl_sfp.h b/include/fsl_sfp.h
index 353a123..2976a2c 100644
--- a/include/fsl_sfp.h
+++ b/include/fsl_sfp.h
@@ -32,7 +32,8 @@
 /* Number of SRKH registers */
 #define NUM_SRKH_REGS  8
 
-#ifdef CONFIG_SYS_FSL_SFP_VER_3_2
+#if    defined(CONFIG_SYS_FSL_SFP_VER_3_2) ||  \
+       defined(CONFIG_SYS_FSL_SFP_VER_3_4)
 struct ccsr_sfp_regs {
        u32 ospr;               /* 0x200 */
        u32 ospr1;              /* 0x204 */
-- 
1.8.1.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to