On 02/09/2016 06:55 PM, Eddy Petrișor wrote:
2016-02-09 19:41 GMT+02:00 Eddy Petrișor <[email protected]>:
When cnt reaches 0, any shift operation will keep cnt=0, so the condition
`cnt >= 0` doesn't make sense.
To fix this endless loop, we drop the useless condition and simply break the
loop when cnt reaches 0.
This should fix the endless issue introduced by the previous patch
8e7cba048baae68ee0916a8f52b4304277328d5e
Hannes, can you confirm that with this patch the reported size is
correct and the boot is normal again?
I initially thought the size might be incorret due to some buggy HW I
have (it has some unstable DDR settings, which lead to incorrect
reports on my side initially).
Hi Eddy,
the board does boot with this patch.
But the reported memsize is wrong.
1GiB instead 256MiB.
So we need some v2 to get rid.
best regards,
Hannes
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
