On Fri, Feb 19, 2016 at 07:19:49PM +0200, Nikita Kiryanov wrote: > During boot, U-Boot raises the CPU frequency but the CORE and MPU regulators > are not updated. This is not a problem in cold boot since the default values > that the pmic outputs are correct, but if Linux were to switch the module to a > low power OPP, the new voltage values will be retained after a reboot and the > module will likely hang once U-Boot raises the CPU frequency back up. > > Set both CORE and MPU regulators to to 1.1V on boot. > > Cc: Tom Rini <[email protected]> > Cc: Albert Aribaud <[email protected]> > Cc: Igor Grinberg <[email protected]> > Signed-off-by: Nikita Kiryanov <[email protected]> > Reviewed-by: Tom Rini <[email protected]>
Applied to u-boot/master, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
