On Fri, Feb 19, 2016 at 9:25 PM, Semen Protsenko <[email protected]> wrote: > From: Sam Protsenko <[email protected]> > > We need to differentiate somehow if u-boot build is intended for Android > or regular Linux boot. Android requires some specific details from > bootloader, such as enabled fastboot and specific partition table. > Using this option we can check if user chose Android boot and configure > those details properly. > > Signed-off-by: Sam Protsenko <[email protected]> > --- > arch/arm/cpu/armv7/omap5/Kconfig | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm/cpu/armv7/omap5/Kconfig > b/arch/arm/cpu/armv7/omap5/Kconfig > index bfa264e..e03daff 100644 > --- a/arch/arm/cpu/armv7/omap5/Kconfig > +++ b/arch/arm/cpu/armv7/omap5/Kconfig > @@ -21,6 +21,14 @@ endchoice > config SYS_SOC > default "omap5" > > +config ANDROID_BOOT > + bool "Android boot" > + default n > + help > + This option enables Android build. Different boards can rely on this > + option to provide Android partition list, enable fastboot capability > + and so on. > + > source "board/compulab/cm_t54/Kconfig" > source "board/ti/omap5_uevm/Kconfig" > source "board/ti/dra7xx/Kconfig" > -- > 2.7.0 >
Consider this patch abandoned as new version was sent aside from this patchset: http://lists.denx.de/pipermail/u-boot/2016-February/246744.html _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
