On Mon, 7 Mar 2016 13:44:11 +0100 Maxime Ripard <[email protected]> wrote:
> From: Boris Brezillon <[email protected]> > > Unlike the datasheet recommendation, the R8 SoC requires a 1.4V supply > for its CPU when operating at 1Ghz. That's interesting. Is this R8 SoC datasheet with the Allwinner recommended cpufreq operating points available in public access somewhere? Are they really recommending 1008MHz @1.3V there? > Rely on the default value specified in the Kconfig entry. > > Signed-off-by: Boris Brezillon <[email protected]> > Signed-off-by: Maxime Ripard <[email protected]> > --- > configs/CHIP_defconfig | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig > index 78b2c511bfa2..3135d1c88e79 100644 > --- a/configs/CHIP_defconfig > +++ b/configs/CHIP_defconfig > @@ -9,7 +9,6 @@ CONFIG_SPL=y > CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2" > # CONFIG_CMD_IMLS is not set > CONFIG_CMD_GPIO=y > -CONFIG_AXP_DCDC2_VOLT=1300 > CONFIG_AXP_ALDO3_VOLT=3300 > CONFIG_AXP_ALDO4_VOLT=3300 > CONFIG_USB_MUSB_GADGET=y -- Best regards, Siarhei Siamashka _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
