On Tuesday 25 August 2009 02:11:36 pm Wolfgang Denk wrote: > Dear E Robertson, > > In message <200908251403.20809.e.robertson....@gmail.com> you wrote: > > I am using the at91sam9263 device from which the bootstrap code load > > u-boot to the desired ram address. However, I would like to re-relocate > > this at the different address based on memory availability. Can / or > > should this be done? > > Yes, it can be done, and it should be done. The fact that we don't do > it so far is due to the fact that the guys who did the original ARM > code found this too complicated (even though they had a working > example in the PowerPC code) and not worth the effort. We're suffering > since from this misconception. > > But there is no reason why you would have to copy the code again - > just copy it to the correct address right from the beginning, like we > do in PowerPC.
By the way, my reason for doing this is that i want to maintain a proportional memory space available so if I increase the ram size I would like to relocate the boot loader without doing a separate build. Make sense? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
