Hi,
On 27-01-16 09:34, Chen-Yu Tsai wrote:
On the A83T and H3, the SID block is at a different address.
Furthurmore, the e-fuses are at an offset of 0x200 within the
hardware's address space.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Thanks, applied to my tree and this will go out with the
next pull-req.
Regards,
Hans
---
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 0cdefdc..f797649 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -74,7 +74,14 @@
#define SUNXI_AD_DA_BASE 0x01c22c00
#define SUNXI_KEYPAD_BASE 0x01c23000
#define SUNXI_TZPC_BASE 0x01c23400
+
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3)
+/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
+#define SUNXI_SID_BASE 0x01c14200
+#else
#define SUNXI_SID_BASE 0x01c23800
+#endif
+
#define SUNXI_SJTAG_BASE 0x01c23c00
#define SUNXI_TP_BASE 0x01c25000
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
